Wireless Universal RF433 Remote Controller

Corresponding frequency 350MHz 315MHz 433MHz optional
Modulation mode wireless
Wireless transmission distance 50100m open ground
Application garage door alarm automatic door rolling shutter door etc
Copy chip type 2260 such as pt2260 sc2260 lx2260 hx2260 2262 such as PT2262 sc2262 lx2262 hs2262 hx2262 etc pt2264 pt2240 lx2240 1527 such as EV1527 hs1527 hx1527 fp527 cs5211 smc918 asmc926 ax5026 ax53264 ht600 ht680 ht6207 ht6010 ht6012 ht6013 ht6014 HT12D ht46f49e pic16f629 PIC16F630 etc Other types of chips compatible with the above chips can also be copied Different chip manufacturers will have different prefix chip models which can be copied as long as the chip models are the same
Note we generally do not recommend copying volume code chips because there are many uncertainties when copying volume code chips When copying the rolling code chip remote controller it is impossible to judge whether the original remote controller chip is an encryption chip It is not recommended to copy the rolling code remote controller with a pair of remote controllers
Packing list
1 x clone remote control

The new remote control has been received How can I copy it
Step new remote control code clearing As shown below
Press clear code at the same time
1 Press and hold the two keys above the new remote control at the same time until the indicator light keeps flashing
2 Release your finger and clear the code successfully
3 After clearing the code press remote control any key The Indicator light will flash and turn off Pay attention
Original Remote Control Do Not This Qing Code Operation
Indicator to Stop Flashing Zai song Hand Not Flashed on Loose
If There Is No Constant Flashing after Pressing for a Long Time the Button Not Pressed at the Same Time Please Repeat the above Steps
Step 2 remote control copy clear the code before operation
1 Left Hand Original Remote Control Right Hand New Remote Control as Far as Possible Together
2 Hold down New Remote Control Open Key Then Press Old Remote Control Corresponding Keys Copy
3 and Other Lights Flash after Release Said Copy Success Other Keys Please Same Operation Copy