Transistor Tester Multimeter Colorful Display TFT For Diode Triode MOS/PNP/NPN Capacitor Resistor Transistor

Cautions for use

The capacitor shall not be tested without discharge
The inductance of the transformer cannot be tested
Dont test online with electricity
Do not hook three hooks onto the circuit board for testing
Do not test live circuit boards
Otherwise the tester will be burnt down Burning the tester is the buyers reason
When the voltage and internal battery are below 3V please charge before use
Please use 5V battery or USB port to charge

LCRT7 LCRTC1color screen AMTY328p chip two functions are the same T7 is slightly faster The TC1 screen is slightly larger and they are all powered by lithium batteries In addition to measuring resistance capacitance inductance diodes MOS transistors thyristors it can also measure additional voltage regulators infrared decoding limited to for Hitachi format

LCRTC1

Feature
Self test with automatic calibration
Size 709026m 271x358x110 inch
DisplayTFT Screen Color Screen
Diode Range less than 45V
Zener DiodeTransistor Detect Area 00145V
Zener Diode Detect Area 00120V
Triac Range IGT less than 6mA
Capacitance 25pF100mF
Resistor 00150M?
Inductance 001mH20H
Power Voltage 37V
Product chip AMTY328p
Power Builtin Rechargeable Lithium Battery
Measurement results using TFT graphic display 160×128

Onebutton operation
Auto power off timeout setting
Builtin highcapacity rechargeable lithiumion battery
Lithiumion battery voltage detection
Support Chinese and English
Warning Builtin lithiumion battery it is strictly forbidden to immerse the tester in water or near heat source
Warning For your personal safety please strictly observe the specifications and precautions for using lithiumion batteries
Transistor Detection
After the poweroff state or test is completed put the test component into the transistor test area of the test socket press the lock handle press the multifunction key the tester automatically measures and the measurement result is displayed at the end of the test
Warning Always discharge the capacitor before connecting them to the tester The tester may be damaged before you turn it on
Warning We do not recommend using a tester to measure the battery The battery voltage must be less than 45V otherwise the tester may be damaged
Component placement
The test socket is divided into transistor and Zener diode test areas as described in 11
Note Do not perform other operations during the calibration process to avoid affecting the calibration accuracy
Packing List
1 x multifunction TFT transistor tester
1 x electronic component group
3 x test hook