Hardware parameters
Voltage DC12VDC24V RT open circuit DC5V RT connected
Distance The distance between the controller and the TTL optoisolator can be up to 200 meters
Pin definition ICLK input clock DAT data output
IDAT input data CLK clock output
IGND Input ground wire GND Light strip ground wire
Size 35308mm
Installation note
1 The maximum cable length between the output port of the controller and the input port of the amplifier is 200 meters If it exceeds 200 meters please test or use optical fiber
2 The length of the output port of the amplifier and the input port of the lamp should not exceed 5 meters
3 When the lamp group is 12V24V RT is open and when the lamp group is 5V RT is connected
4 It is forbidden to operate with electricity Before installation the power must be cut off and the joints should be waterproof