Product parameters
Name Portable Handheld Spot Welding Machine
LCD display powergeardelayvoltagemode
Gear adjustment 80 gears
Battery Type Lithium Polymer Battery
Battery capacity 5000mAh
Design current 800AMAX
Input interface Typec
Input parameters 5V21A
Nickel strip thickness 0102mm
Product size 2515825mm
Welding method Visually observe the welding head hold it at 60 to the horizontal plane and press the two needles on the surface of the nickel sheet at the same time
Spot Welder Operation Guide
1 After getting the product please read the manual carefully
2 Press and hold the power switch if there is no operation for 6 minutes it will automatically shut down
3 Support nickel sheet thickness 0102mm
4 After starting up the product is in automatic welding mode
5 When the welding head detects that it touches the metal it can output once and after lifting it up it can weld the next time
6 Make sure that the welding surface of the battery is free from rust clean and flat
7 Make sure the nickel sheet is clean and flat
8 Set up the spot welding machine press properly and forcefully to make the welding needle and the nickel sheet and the nickel sheet and the battery have good contact no suspension or poor contact and good welding can be achieved Different thicknesses of nickel sheets and different gears do not mean that the greater the power the better the effect Users can try which gear is more suitable
9 Use Typec charger to charge 5V input higher voltage input is strictly prohibited use 5V2A charger This product supports using while charging
Packages
1X spot welder
1XTypec charging cable
1X nickel sheet
1X 012mm nickelplated nickel sheet
Weight | 1 kg |
---|