Motorcycle TPMS Motos Tire Pressure Monitoring System Motor Tyre Temperature Alarm With 2 External Sensors

Description
This TPMS is designed to provide you with more protection when riding It will warn the tire condition in advance After installing TPMS this system can monitor the tire pressure and temperature in real time If any abnormal tire pressure and temperature are detected the system will send a warning sound and a bright flashing icon to inform you in real time Realtime reminders and problem solving can prevent traffic accidents and ensure the safety of riders and passengers

Feature
With a QC 30 fast charging USB output port it can charge mobile phones tablets and power banks
Supports detection and display of battery voltage
Supports lowvoltage alarm function

Specification
Model AN08A
Tire pressure setting range 0135Bar
Temperature setting range 60100
Working temperature 2080
Storage temperature 3085
Power voltage DC 12V
Output voltage DC 12V 9V 5V
Frequency 43392MHz2000MHz

Receiver
Working temperature 2080
Storage temperature 3085
Poweron voltage DC 5V
Frequency 43392MHz2000MHz

Sensor
Working temperature 2080
Storage temperature 3085
Pressure range 035Bar
Pressure accuracy 01Bar
Temperature accuracy 3
Transmitting power lt10dB
Frequency 43392MHz2000MHz

Bracket installation instructions
1 Unscrew the 2 screws put on the motorcycleelectric bikebicycle and tighten
2 Place the mounting head of the bracket toward the position you need and confirm that the bracket is firm
3 Install the tire pressure receiver on the bracket tighten it and then lock it use the ball head to rotate the tuning knob to move the joint part to adjust the appropriate angle appropriately

Power installation instructions
1 When installing the power cord needs to be connected behind the ignition switch and the power can be automatically cut off after shutting down The red connects to the 12V positive pole and the black connects to the ground
2 Install the fixed bracket on the handlebar and lock it tightly Install the host on the bracket and adjust the angle and lock it
3 Install the sensor when the host is turned on First install the tamper ring into the valve nozzle then install the sensor on the valve according to the position and tighten it then screw the tamper ring back and tighten it If you find that there is no corresponding position on the host If the pressure is displayed reinstall the sensor at the corresponding position

Sensor battery replacement instructions
When replacing the battery of the sensor please disassemble one by one install the shell do not mix or disassemble and install at the same time it can effectively prevent the sensor from being misplaced and installed on other tires due to the wrong shell Button CR1632 working temperature is 3080 it is available in stores
1 Before disassembling the sensor please prepare a nut wrench turn the nut clockwise to separate the nut and the sensor and then remove the sensor counterclockwise
2 Use a wrench to unscrew the upper cover of the sensor in a counterclockwise direction
3 Take out the old battery from the battery clip and do a good job of environmental protection classification
4 Distinguish the positive and negative positions positive facing up install a new button battery CR1632
5 Screw on the upper cover of the sensor and then tighten it clockwise with a wrench

strongPacking liststrong

Package includes
1 X Receiver
2 X Sensors
1 X Bracket
1 Set X Accessories