Diaphragm Ball Lock Spunding Valve Complete Kit for Home Brewing beer corny beer keg

This Kit Includes
1 x Blow Tie Spunding Valve
1 x duotight 8mm tee piece
1 x duotight FFL to 8mm fitting
1 x 8mm Push in 015psi Guage
1 x Premium Ball Lock Disconnect MFL GreyGas
2 x NEW Black 8mm straight joiner pieces

nbsp

nbsp

Pressure Fermentations
With pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process The BlowTie has been designed specifically for this reason

Pressure Transfers
When transferring from keg to keg keg to bottle or fermenter to keg its often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated For this reason the BlowTie can consistenly control this head pressure giving you more consistent results and without losing carbonation in the process

Traditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during opperation Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately

The BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure
Instructions
Use the yellow adjustment knob to control the pressure coming out of the pressure vessel Clockwise is higher pressure and anticlockwise is lower pressure
We would recommend gassing a keg to a known pressure eg 15psi then attach your Blow Tie Kit to the keg and adjust to 10psi

Specifications
1 Made from food grade acetal
2 Stainless screws
3 8mm 516 push on both sides
4 015psi pressure rating