Copier Duplicator 125KHz Key fob NFC Smart Card Reader Writer

strongProduct Featuresstrong

1 Compliant with CCID

2 Compliant with PCSC

3 Support ICID dual frequency replication

4 Driverfree no need to download software installation

5 When connect the RFID Reader to the computer with the USB cable then can find the software

6 Support ID125K 8800 5200 4305 5577 8265 card

7 Support UID FUID CUID UFUID IC semiencrypted card IC full encryption card

8 Has USB full speed interface

9 Twocolor LED light prompt red light is standby green is working

10 Builtin buzzer beep sound reminder

nbsp

nbsp

strongProduct Parametersstrong

Dimensions 108 L X 68 W X 12 mm H

Interface USB full speed

Working Voltage 5 V DC

Working current 200mA

Standby current 50mA

Normal current 100mA

Working frequency 125KHz 1356 MHz

Smart card support for 125KHz ID type EM4100 TK4100 8800 5200 EM4305 T5577 8265 etc

For 1356MHz IC type UID FUID CUID UFUID IC Halfencryption IC Fullencryption etc

Supported operating systems SupportWindows computer Not support Linux Mac

strongHow to use the card readerstrong

1 Connect the device to your computer with the USB cable

2 You can find and open the software on your computer

nbsp

strongRead and write ordinary 125KHz RFID cardstrong

1 Place the card on the card reader and press Read on the software to scan the card

2 The software will scan and display the card number

3 Place a writable T5577 125KHz writable chip on the card reader and press Write on the software

nbsp

strongRead and write 1356MHz IC IC half encryption card IC full encryption cardstrong

1 Place the card on the card reader and press Card number or Start decoding on the software

2 The software will scan and display the card number

3 Place a writable UID 1356MHz writable chip on the card reader and press Write Card on the software

nbsp

strongProduct Detailsstrong

strongLight weight body Mini Designstrong

ABS flameretardant material casing small and light the interior is controlled by highquality microchip and the card reading effect is fast

nbsp

strongLED indicator lightbuzzerstrong

The LED indicator light is red under standby mode and its green under the card reading status Builtin buzzer very convenient for effective prompts

nbsp

strongAntislip mat at the bottomstrong

The bottom is made of a sponge mat and the inside of the sponge is a removable screw

nbsp

strongUSB full speed and efficientstrong

12m long USB transmission cable fast response No need to install the driver quickly read the card number

nbsp

strongBuiltin mobile disk with software plug and playstrong

Connect the RFID reader to your computer with the USB cable then can find the software