Car body Dent Removal Tool Dent Repair Puller Kit Slide Hammer Suction Cups

How to use
1Clean the dent with a clean wet cloth
2Mount the glue stick into the glue gunpull the trigger to let the glue stick enter into the glue gun connect the power source and preheat for 5 minutes
3Use a proper drawing gasket Large dent requires a large drawing gasket Note The larger the
drawing gasket is the larger the drawing force is 4 Pull the trigger and apply the drawing gasket with extruded glue The 4 holes of gasket should be applied with hot melt glue
5 Fast place the drawing gasket with hot melt glue at the center of dent press lightly until the glue cures and adheres Let the glue cool for about 8 minutes The cooling time should be less than 10 minutes and should be shorter slightly in winter
6 Align the Tshaped repairer and press the drawing gasket with hot melt glue pull the sliding rod backwards to pull up the dent
7 Check with a Line board If dent still exists knock it slightly with a flattening hammer or pen
8 Clean the repaired place with a clean wet cloth

Package Contents
1 Car Dent Puller Tools kit as picture