Automatic Water Level Control Valve Tower Tank Floating Ball

Automatic control low selfcomplementary water water full automatic stop
Four intakes large volume of water
Beautiful appearance small size practical simple installation
Without electricity easy to use long life low failure rate saving water resources
Working pressure range 110KG 011MPa
Applicable Medium clean water
Applicable Medium temperature 70
Resistance to high temperature medium temperature 70120

When the pool or tank water levels fall the valve body will sink down and then the forerunner of the control valve will be opened As the pipe water pressure affects the seal face of control valve will be opened Finally the water comes out and vice versa

Note
This production belongs to the liquid level control valves When installed the float must be vertical if you need to install from the top a Elbow needed to connect the float valve and the inlet line Firstly the feed line should be fixed in horizontal plane and then connect the automatic water level control valve on the water inlet according to the standard The main water inlet should be lined with the control valves Normal Diameter When using the globe valve should be all open If two valves are installed in the same pool the two valves should be held in the same horizontal plane Before installing please clean the impurities in the pipes in case of blocking
If the water quality is not good then the valves need to be maintained properly
If the users find the time of adding water becomes longer he can just upload the water inlet and make it washed

Material Nylon PA66Food grade rubber
Size 72x50x70mm
Quantity 1 Pc
Note
Please allow 13mm error due to manual measurement pls make sure you do not mind before you bid
Due to the difference between different monitors the picture may not reflect the actual color of the item Thank you

Package Contents
1 x Water Level Control Valve