2 in 1 Mechanical Car Tire Deflator Gauge 0-70 PSI/0-5 Bar 4X4 Large Offroad Tires With Valve

A professional tool worth having UNIVERSAL FIT CAR TRUCK

Protect your vehicle

Extend useful life of tyre

Save your FUEL cost

Enhance your driving ability
Protective pouch and instruction sheet
Lifetime Warranty

Excellent Deflation Chuck Durablefor tire deflation adjustments
Suitable for trucks motorcycles automobiles and any passenger vehicles

The key reason should be repeated three times Keep you and your family saferKeep you and your family saferKeep you and your family safer

nbsp

Unit change for psi bar and KPa
1PSI0069BAR007KGCM2

How To Use

1 Use the pressure recommended by your vehicles manufacturer This information is usually located in the driversside door jamb glove compartment or owners manual
2 Check pressure when tires are cold and have sat for at least three hours
3 Removing cap from inflation valve Keep caps safe as they protect the valves

4 With the slide valve pushed forward thread the valve stem adaptor onto the valve stem in a clockwise direction

5 Push the valve core remover forward until it engages the valve and turn anticlockwise to remove valve

6Pull out on the slide valve to release air Pusin on the slide valve to stop air and check the pressure Note gauge wnot show correct pressure whilst deflating

7When the valve core is removed it will push the core remover out and the gauge will read the tyre pressure
8Remove the unit by turning the valve stem adaptor in an anticlockwise directionEnsure a valve cap isplaced on the valve stem to prevent ingress of debris

Notes

1Pressure increases with heat Tires can lose one pound per month under normal conditions
2Do not exceed maximum pressure on gauge
3Dropping or severe jarring may impair accuracy of gauge

Get One For You And Your Family