12V to 24V car Access control magnetic sensor/safety loop detectors for gate barrier

STANDARD FEATURES

nbsp

1 Reset Switch The reset switch enables the detector to be manually reset during

commissioning and testing This results in the detector retuning the sensing loop and

becoming ready for vehicle detection

2 Selectable Pulse Time This feature sets the length of time that the pulse relay will be

energized for 1 Second or 05 Seconds

3 Pulse Relay Selection The Pulse Relay may be configured to energize on detection of a

vehicle or when the vehicle leaves the loop

4 Sensitivity Boost This feature sets the undetect level to maximum sensitivity and is used

to prevent loss of detection of highbed vehicles

5 Switch Selectable Sensibility 4 sensitivity setting are available on the switches to allow

flexibility in configuration

6 Switch Selectable Frequency 4 frequency settings are available to prevent crosstalk

between adjacent loops

7 Filter Option This option is used to provide a delay between detection of the vehicle and

switchiing of the output relay This relay is normally used to prevent false detection of

small or fast moving objects

8 Permanent Presence Option This feature ensure detection of the vehicle will be maintained

when the vehicle is parked over the loop for extended periods

Technical Data

Power supply ACDC 1224V

Power consumption 3W maximum

Output relay 120V3A AC

Work temperature 20C to70C

Loop inductance range 50to800uH 100300uH

Work frequency 20 to 130KHz

sensitivity four class adjustable

automatic calibration 1s to 2s

dimension 7922590mmLWH