Wifi Power Amplifier 2.4GHz 802.11b/g/n Wifi Signal Repeater Router Range Extender Booster

strong8Wstrongstrong strongstrongFeaturesstrong
Lownoise receive gain
Signal activity LED indicates
High Gain High Value High Performance
Maximum output power of 8000mW by the Booster
Plugandplay Easy installation no driver needed
Ideal for increase the 24002500Mhz frequency devices
Increase the effective range and coverage area of your WiFi network
Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow
The amplified wireless signal may even penetrate complex environments with many walls and obstacles
Ideal for use with 24GHz Wireless LANs Support 80211b 80211g 80211n 24Ghz mode only

strongSpecificationstrong
Operation Range 24002500 MHz
Operation Mode Bidirectional halfduplex AutoSwitching via carrier sensing
Frequency Response 1dB over operation range
Input Power 3dBm Min20dBm Max
Output Power 8000mW39dBm nominal
Connector SMA Receptacle 50 ohm
Transmit Gain 1618dBm nominal
Receiver Gain 1012dBm
Receive Noise Figure 30dBm nominal
Operating Temperature 40 to 70 degree
Operating Humidity Up to 95 relative humidity
Material Cast Aluminum
INPUT100240V 03A
OUTPUT12V 15A

Installation steps

Step 1 Remove the power supply of the wireless APRouter

Step 2 Remove the antenna of the wireless APRouter

Step 3 Use the standard RG316 feeder to connect the bidirectional amplifier RFIN and the antenna of the             wireless APRouter

Step 4 Rotate the antenna to the RFOUT port of the bidirectional amplifier

Step 5 Power the bidirectional amplifier first then power the wireless APRouter

strongPackage includedstrong
1 x WiFi Amplifier
1 x Connector cable
1 x Power supplySome models not
1 x Manual