Foldable Tripod Monopod Selfie Stick Bluetooth With Wireless Button

div classdetailmodule_dynamicdiv
div classdetailmodule_text
p classdetaildescdecoratecontent stylefontfamily OpenSansfontsize 14pxfontweight 300lineheight 20pxmarginbottom 12pxSpecification
Multiangle shooting with 90 degree vertical shooting
Compatible with smartphones and GoPro cameras iOS 50 and above Android 42 and above
Tabletop tripod ground top tripod and selfie stick function
Height adjustable from 180 millimeters to 400 millimeters
Bluetooth shutter release
Bluetooth version 30
Range 10 meters
Stretch length570mmp

div
div classdetailmodule_text
p classdetaildescdecoratetitle stylefontfamily OpenSansfontsize 20pxfontweight 900lineheight 28pxmarginbottom 12pxMi Bracket Selfie Stick Function Definition Tablep
p classdetaildescdecoratecontent stylefontfamily OpenSansfontsize 14pxfontweight 300lineheight 20pxmarginbottom 12px1 When the red indicator light flashes it means that the battery is low and needs to be charged in time The red indicator light will be on during the charging process and the blue light will be on when it is fully chargedp
2 Camera light indication short press the camera button and the blue indicator light will be on

3 Poweron mode Pairing mode press and hold the camera button for two seconds and then release it after the blue light turns on do not release the pairing mode and hold for more than one second when the blue light flashes it will directly enter the pairing state and then connect back after turning on the phone After failing to connect back it enters the pairing state and the blue light flashes

4 Shutdown mode In the startup and sleep state press and hold the camera button for 3 seconds to turn off the indicator light

5 Paired and connected status The camera indicator light is steady blue

6 No pairing connection status The camera indicator flashes blue

7 Sleep state After power on there is no pairing connection it will automatically enter sleep after 10 minutes the camera indicator will turn to 20 brightness no longer flashing and it will not automatically shut down after sleep

8 Sleep and wake In sleep mode short press the camera button the indicator will return to 100 brightness and then connect back first and enter the pairing flashing state after the failure to connect back

9 Take a picture short press the camera button

10 Disconnectturn off the Bluetooth of the mobile phone when the distance is too far When the Selfie and the mobile phone are disconnected due to a long distance or the Bluetooth function of the mobile phone is turned off due to various reasons the Selfie will directly enter the sleep state

11 Connect and take photos while charging first connect to the power supply to charge then pair and connect to the mobile phone or first pair and connect to the mobile phone and then connect to the power supply to charge the selfie camera can still be paired and taken normally

div
div classdetailmodule_text
p classdetaildescdecoratetitle stylefontfamily OpenSansfontsize 20pxfontweight 900lineheight 28pxmarginbottom 12pxHow to use the selfie stickp
p classdetaildescdecoratecontent stylefontfamily OpenSansfontsize 14pxfontweight 300lineheight 20pxmarginbottom 12pxThe connection method of Mi selfie stick is
first step
After long pressing the button for 3 seconds the blue light is turned on When the blue light flashes after turning on the Mi selfie stick enters the Bluetooth pairing mode
The second step
Turn on the mobile phones Bluetooth function enter the search state find the XMZPG Bluetooth signal and click Connect it will automatically pair and connect After the connection is successful the blue Mi selfie stick button flashes and goes out and the button stays on and the blue light indicates the connection is successful
third step
Rotate the phone holder by 270 degrees first then hold both ends with your hand and gently stretch the telescopic rod section by section
the fourth step
After installing the mobile phone on the mobile phone holder you can directly turn on the mobile phone camera and then press the button of the Bluetooth camera to take pictures
the fifth step
First bend the phone holder to a certain extent then hold the tail of the telescopic rod with your hand press the tail end of the tail with your thumb and the other end connects the head part to a hard object so that the telescopic rod gradually shrinks togetherp

div
nbsp