Color temperature
The model without remote control is single color temperature white light 6000K warm white light 3000K
The remote control model has 3 color temperatures that can be switched white light 6000K natural light 4500K warm white light 3000K
Specification
Material ABS shell PC lampshade
Voltage 37 V
Battery capacity 50W 1500mAH 80W 3000mAh 120W 5200mAh
Solar panels 50W 6V15W 80W 6V25W 120W 6V4W
Waterproof grade IP65
Control method human body induction light control induction remote control lamp body button
Charging time about 6H
Working hours 810H
DAYTIME AUTOMATIC CHARGINGCHARGING TIME 56H
NIGHT AUTOMATIC LIGHTING 810 HOURS LIGHTING
3 SENSING MODES
MODE1Low Light Motion Sensor Mode
The lights dont turn on during the day and when someone passes by at night the lights turn to dimly lit for 20 seconds without induction
MODE2Motion sensor mode
The lights do not turn on during the day when someone passes by at night it turns on completely and when no one is there it automatically turns off within 20 seconds
MODE3Light Control Mode
No lights during the day slightly bright at night and the human body sensing function is not activated
Detection range 410M Detection angle 120
The greater the range of human motion the closer the sensing distance
REMOTE CONTROL DISTANCE68M
Multiple working modes
ONOFF
First turn on the green power button on the lamp body to activate
4 MODES
M1 Lights up when people come slightly brighter when people leave
M2 All lights when people come all lights when people go
M3 20 light all night without induction
EM Lights all day no induction
COLOR TEMPERATURE
Warm white lightnatural lightwhite light
Onekey switch of color temperature
Show description
1When the indicator light is on the solar wall light does not work
2The lights are off during the day fully on at night when people come and automatically turn off the lights within 20 seconds when no one is there
3Turn off the lights during the day turn on the lights at night when someone comes and turn on the lights at 20 brightness within 20 seconds after the person leaves
4Nolights during the day slightly bright at night and the human body sensing function is not activated
5Displaying green means charging and dispayingred means charging is complete
6Clik the modeswitchthe indicatur light is on press and hold for 5seconds to enter the emergency modewhich remains fully on during the day andnight
For remote control control thegreen power button on thelamp body must be turned on to activate the remote controlfunction
Recommended installation height is 335 m
1 measure paper stick onthe wall and punch holes
2 The expansion rubber plugis inserted into the hole
3Screw in the screws reserve 58mm
4 Installation is complete
Weight | 1 kg |
---|